Latest Update: 04/01/2021


The below log shows all updates for this product since release:


v1.06.2

- FMC fixes (SID/STAR selection, DTO)


v1.06.1 - 24/12/2020

- Custom sounds causing audible artefacts (‘popping’) – fixed

- Various tweaks to EFB logic for more accurate payload management


v1.06 - 22/12/2020

- EFB added - provides control over animations, announcements, fuel and passenger load (refer to FAQ here)
- Fuel quantity gauges changed to KGs to match other indicators
- N1 and TGT bugs can now be set with electrical power off and positions will be saved/restored with panel state
- Glideslope/localiser capture issues after using RNAV - fixed
- FDE changes (cruise attitude, stability in IAS/MACH modes)
- HSI CDI now working correctly when flying from a VOR
- Minor livery fixes
- Various improvements to custom sound system
- Tweaks to cabin announcements
- New wing views added
- 300QT GSX profile fixed
- Engine anti-ice intake low pressure remaining illuminated after engine start at low N1 values - fixed
- Tweaks to air-con system (e.g. flight deck and cabin fans now affect temperature change rate)
- Power icon and menu state options can now only be selected when on the ground to avoid inadvertent selection during flight
- Added further GSX compatibility (e.g. doors will now auto open/close, cabin crew arm/disarm door announcements triggered by GSX boarding/deboarding status)
- Animation panel now indicates when doors are open, stairs are extended or GPU is enabled
- Speeds card clickspot will now also set N1 and TGT bugs
- FMC fixes (including DTO)


v1.05 - 11/12/2020

- FMC not appearing for some users - fixed

- Pilot and cabin announcements added (refer to the FAQ here for more details)

- MWS ground op mode added

- MWS trigger time delay added

- DC meters now show battery voltage when selected, regardless of battery switch position

- Yellow hydraulic system no longer indicates pressure with only DC pump on

- Air-conditioning recirculation valve will now only open with sufficient air flow from packs

- Engine air valves will now only open with sufficient air flow from engines

- APU TGT will now vary depending on APU air, pack and recirc selections

- TGT logic improved to produce more realistic values at engine idle, start and max thrust

- Galley power will now add to electrical load

- Fuel flow logic tweaked

- HSI glideslope indicator flag always visible when using NAV 2 - fixed

- Autopilot VLOC mode not holding course when using NAV 2 - fixed

- RMI logic fixes

- Cabin lights not illuminated on 146-300 variant - fixed

- Stall buffet sounds added

- Quick select added for course/heading knobs

- Glideslope/localiser capture logic fixes

- Flood lighting colour tweaked for better match to real aircraft

- Tail navigation lights added

- Appearance of digital display screens improved

- Payload manager fixes

- CTD when switching between 146 variants - fixed

- Flight idle animation added to thrust levers

- APU needles now swing to zero when switch moved to STOP

- Airbrake control range increased

- Volume increased for various custom sounds


v1.04 - 04/12/2020

- F/O ASI inoperative on 200/300 variants - fixed

- Various autopilot tweaks and fixes

- Elevator trim no longer initialising to take-off position on first load - fixed

- 'Turnaround' aircraft state menu option added 

- Weather radar Active Sky compatibility fixes

- Decimal point missing from altimeter inHG barometric setting - fixed

- Flap animation tweaked

- Livery and minor texture fixes

- Light effects tweaked to avoid cockpit light spill on -300 variant

- Glideslope/localiser capture logic fixes

- Clickspot added to FMCs for toggling 2D pop-up

- Speed bug clickspot logic improved

- Improvements to exterior glass

- External AC/DC power can now be supplied by GSX jetway or GPU

- Flaps now retract fully when selecting ‘Cold & Dark’ state

- MWS amber caution will now automatically cancel if no amber captions remain

 

(We continues to work on a solution for the FMC not appearing bug and other feature requests/bugs)


v1.03 - 02/12/2020

- FMC font display issue - fixed

- Custom sounds missing from 146 Statesman - fixed

- Improvements to brake temperature logic

- State saving toggle not working - fixed

- RMI needle logic changes

- ADF2 middle digit cannot be selected to '0' - fixed

- AP sync mode can now be toggled using the yoke sync buttons

- Mouse wheel logic reversed for elevator trim wheel

- Flight director now available with IAS/MACH modes

- F/O lighting control animations fixed

- QT/QC cargo door open/close rate slowed

- Glideslope deviation triggering GPWS audible warning but not lights - fixed

- GPWS glideslope warning can now be disabled by pressing the GPWS PULL UP button

- Glideslope/localiser capture logic improved

- ASI bugs can now be set automatically to speed card values for take-off or landing (click on speed card)

- Menu option added for toggling the automatic syncing of Captain and F/O altimeters

- Elevator trim change rate slowed for more refined pitch setting in manual flight


v1.02 - 30/11/2020 

- FS avionics master logic - fixed

- ICE DETECT annunciator remaining on despite anti-ice controls switched on - fixed

- Probe icing occurring despite probe heaters switched on - fixed

- 'Toggle Panel Selector' menu option - fixed

- Autopilot altitude capture 100ft below target - fixed

- Livery fixes (including smile added to 146-100 PSA)

- External aircraft effects added (with configuration tool option added for enabling/disabling effects)

- Improvements to exterior glass reflectivity

- Changes to security validation to reduce risk of failure


v1.01 - 28/11/2020

- MWS cautions triggered with electrical power off - fixed

- 300QT ASL airlines livery - fixed

- Improvements to spray effect

- Autopilot not following FMC route with LNAV engaged - fixed

- Heading bug not settable with LNAV engaged - fixed

- Minor changes to FDE

- Improvements to exterior glass reflectivity

- Changes to security validation to reduce risk of failure


The product download in your account is updated as and when updates are released, so if purchasing after any of the given dates your product will include all updates prior to that date.


To download updates you will need to re-download the product from the 'Your Orders' section of your account which you can log into by clicking here.

For guidance on downloading this update, please visit this FAQ.hereHereherehere