Latest Update: 2024/06/26
The below log shows all updates for this product since release:
Technical Update 7.0
FIX LIST:
- FIXED – Issue with adding duplicate airports.
- FIXED - Mist conditions not rendering correctly.
- FIXED - Aircraft proposing with pressure changes.
- FIXED - Snow rendering adjusted.
- FIXED - Inaccurate temperature rendering at surface.
- FIXED – Pressure reporting within simulator.
- FIXED – Rapid airspeed changes.
- FIXED – Fixed incorrect wind and air temperature aloft reports.
- FIXED – Snow not showing in specific areas without an airport.
- FIXED – Pressure changes causing the aircraft to porpoise.
- FIXED – Wind direction listed as VRB causing full weather load to fail.
- FIXED – Overcast clouds causing no clouds to load in second load.
- IMPROVED – Weather transition rate to maximum of 1500 ms.
- UPDATED - Integrated additional weather API functions into system.
- UPDATED – Application update system.
- ADDED – Ability to search historic/archive weather data.
- ADDED - Integrated new weather API into system.
- ADDED - Historic/Archive weather rendering.
- ADDED – Support for profile.json validation.
- ADDED – Integrated new security API into system.
Technical Update 6.0 - 2023/03/27
FIXED – Compatibility with the latest version of Microsoft Flight Simulator - (1.31.22.0).
FIXED – Snow coverage handling.
IMPROVED – Thunderstorm cloud rendering
Technical Update 5.0 2022/11/
- FIXED – Compatibility with latest version of Microsoft Flight Simulator (1.29.28.0)
- FIXED – Temperature rendering within aircraft
- FIXED – Pressure rendering within aircraft
Technical Update 4.5 - 2022/09/26
- FIXED – Compatibility with latest version of Microsoft Flight Simulator (1.27.21.0)
- FIXED – Temperature rendering within aircraft
- FIXED – Pressure rendering within aircraft
- IMPROVED – Rendering of Aerosol experience
Technical Update 4.0 - 2022/08/05
- FIXED – Anomalies in cloud rendering algorithms.
- IMPROVED – Temperature rendering at surface and aloft.
- IMPROVED – Pressure/Altimeter rendering at surface and aloft.
- IMPROVED – Wind rendering at surface and aloft.
- IMPROVED – Frame rate performance and experience via performance option.
Technical Update 3.0 - 2022/04/29
- FIXED - Compatible with the latest version of Microsoft Flight Simulator (1.25.7.0)
- FIXED – Immediate snow fading.
- FIXED – Snow reduction process and moved independent process.
- FIXED – Inaccurate temperatures and winds aloft.
- FIXED – Precipitation not rendering within the flight simulator.
- FIXED – Clouds not disappearing over time.
- FIXED – Rapid pressure changes at surface and aloft.
- IMPROVED – Favorite airport data updates.
- IMPROVED – Cloud frame rate hit by adding additional performance option
- UPGRADED – Data transfer code from Webservices to Web API.
Technical Update 2.2.1 - 2022/03/03
- FIXED – Compatibility with the latest version of Microsoft Flight Simulator (1.23.12.0).
- FIXED – DPI scaling when value is greater than 100%.
- FIXED – Excessive lightning rendering during storms.
- FIXED – Misspelling of DWP Rainy Day pre-set description.
Technical Update 2.2 - 2022/01/10
FIXED – Compatibility with the latest version of Microsoft’s Flight Simulator 1.21.18.0
FIXED – Missing weather data when notes field is null
FIXED – Inaccurate wind and temperature rendering at the surface and aloft.
FIXED – Rapid pressure changes at higher altitudes
FIXED – Weather search for airports with specific wind speeds or visibility readings
FIXED – Aerosol rendering even when disabled
IMPROVED – Snow rendering formula
IMPROVED – Frame performance
Technical Update 2.1 - 2022/01/05
- FIXED – Winds and temperatures aloft rendering
- FIXED – Cloud layer rendering
- FIXED – Rapid pressure changes at higher altitudes
- IMPROVED – Frame performance
Technical Update 1.7 - 21/10/2021
- FIXED – Compatibility with the latest version of Microsoft’s Flight Simulator 1.20.6.0
- IMPROVED – General overall weather injection performance
Technical Update 1.6.0 - 23/09/2021
- FIXED – Rendering of upper-level winds and temperatures at all levels.
- FIXED – Improved closest weather update rendering algorithm.
- FIXED – Saving Aerosol settings option.
- FIXED – Improved weather search rendering algorithm.
- FIXED – Improved weather engine cloud layer rendering.
- IMPROVED - General overall performance and rendering.
Technical Update 1.5.0 - 19/02/2021
- ADDED – Compatibility with the latest version of Microsoft’s Flight Simulator (1.18.14.0).
- FIXED – Pressure interpretation.
- FIXED – Winds and temperature aloft rendering in upper levels.
- FIXED – Pressure where data is missing in the weather data.
- FIXED – Incorrect pressure rendering on the main interface.
- FIXED – Ground snow not properly clearing over time.
- FIXED – Overcast clouds not properly clearing over time.
- FIXED – Low-level clouds not rendering bases correctly.
- FIXED – Weather computations that were causing weather to sometimes not inject during flight.
Technical Update 1.4.0 - 19/02/2021
- FIXED – Compatibility with latest version of Microsoft’s Flight Simulator (1.13.16.0)
- FIXED – Weather injection with metar reporting precipitation, but no clouds
Technical Update 1.3.0 - 21/01/2021
- FIXED – Favourite airport weather updates.
- FIXED – Aerosol option not saving.
- FIXED – Clouds not clearing after full overcast.
- FIXED – Ability to startup multiple versions of Weather Force.
- FIXED – Improper weather mode reporting after selecting DWP weather injection on initial load.
- FIXED – Snow not rendering with use of DWP.
- FIXED – No snow generating when snow was falling at the airport.
- IMPROVED – Cloud rendering based upon saturation and stability indexes found in the atmospheric column from balloon and model data.
- IMPROVED – Clearing cloud density during weather automation.
- IMPROVED – Pilot2ATC file export weather updates.
- IMPROVED – Surface weather condition rendering at higher elevation airports.
- IMPROVED – Initial load of snow on ground based upon 7-day weather conditions.
- ADDED – Instant updating of temperature, pressure and wind during initial weather injection.
- ADDED – Instant snow coverage if snow is falling at the departure airport.
- ADDED – Function to keep snow coverage on the ground during flight based upon 7-day review of snowfall at the airport and temperature during flight.
- ADDED – Ability to search weather and view weather at favourite airports during weather synthesis.
Critical Update 1.2.1 - 23/12/2020
- FIXED – Compatibility issue with Microsoft Flight Simulator 1.12.13.0
Technical Update 1.2 - 22/11/2020
- FIXED – Multiple cloud layer decks now rendering properly.
- FIXED – Registration process, to avoid having to re-enter registration criteria.
- FIXED – Tightened weather synthesis grid to locate closer airports.
- FIXED – Reduced thickness of low level overcast cloud layers.
- FIXED – Increased font of METAR and TAF reports on main interface.
- IMPROVED – Fog rendering when no clouds are reported on the METAR.
- ADDED – Support for Pilot2ATC.
- ADDED – Option to disabled Aerosol synthesis during weather injections.
- ADDED – 4 additional Dynamic Weather Pre-sets: Blizzard, Thunderstorm, Rainy Day and Bob Ross Happy Clouds.
Technical Update 1.1 - 02/11/2020
- FIXED – Extreme cold temperatures aloft.
- FIXED – Temperatures to match data from data models.
- FIXED – .NET error 0xC000014B by updating to latest build of SimConnect.
- FIXED – Range of weather search for live weather search and injection.
- FIXED – Some favourite airports not being created due to improper characters.
- FIXED – Registration errors to confirm data is valid.
- FIXED – Clicking favourite airports causing weather reports during Weather Synthesis.
- FIXED – Favourite airports loading store airports on server.
- FIXED – Favourite airports refresh every 30 minutes.
- ADDED – ICAO weather search show ICAO on top of rest of data surrounding the ICAO.
- ADDED – Persistent weather data injection to help reduce frame rate hits during injection.
- CHANGED – Weather presentation to show wind direction in degrees.
- CHANGED – Dynamic Changing Weather Scenarios to Dynamic Weather Pre-sets to make more sense.
- CHANGED – Security protocol within the application.
- REMOVED - Temperature, pressure, and wind controls from main injection so they will read as aircraft is in flight.
- SUPPORT - Microsoft Flight Simulator 1.10.7.0
The product download in your account is updated as and when updates are released, so if purchasing after any of the given dates your product will include all updates prior to that date.
To download updates you will need to re-download the product from the 'Your Orders' section of your account which you can log into by clicking here.
For guidance on downloading this update, please visit this FAQ.